CEU Circulating Electric Lubricator

Features:

1.CEU type is circulating lubricator, which means the oil flows out, then comes back into the oil tank through the cyclic inlet. The cyclic inlet has magnetic filter, which can block the impurities and assure the oil clean.

2.CEU type is without timer, also could be controlled by Programmable Logic Controller (PLC).

3.After installing and connecting the piping, feed oil till oil flows out, then start to use this lubricator.

4.It used a high quality alloy steel gear pump and induction motor that not only has steady output pressure and low noise, but also can assure each lubrication point with output of oil. It can be applied for large machines’ request.

5.It has a pressure switch device and been set up as 1kg/㎝², which assures the oil volume of lubrication point and detects if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have abnormal signal. NO (Normal Open) contact is on request.

6.It has a pressure-regulating valve, which can adjust the pressure and easy to check from the pressure gauge.

7.It has a float switch that can detect the oil volume . It will have an automatic signal when the oil level is lower than the minimum.

8.CEU type could be installed a power indicator on request.