CEN04 Pressure-Relief Electric Lubricator

Features:

1.CEN04 type has a timer, which controls the operation and interval time. It has operation, abnormal and interval indicators that is easy for visual checking.

2.Recommend to work with volume distributors. If works with CAB or CBB type volume distributor, it will feed oil during operation time. If works with CDB or T type volume distributor, if will feed oil during interval time.

3.The discharge volume is fixed. The lubrication points of volume distributor supply a fixed flow of oil.

4.It has a pressure switch device and been set up as 8kg/㎝², which assures the oil volume of lubrication point and  check if the piping works normally. The standard specification is NC (Normal Close) contact, which means if the pressure is abnormal, it will have signal.

5.It has a float switch (NC Contact) that can detect the oil volume. When oil is lower than the minimum level, the float switch will send continuous signal automatically and the buzzer will alarm.

6.t has a pressure gauge where an operator can check the pressure easily.

7.Please don’t press the force feed-oil ( F button) more than three minutes in order to avoid overloading. When the temperature reaches 100℃, the sensor will be on to stop the motor continue running about 5 minutes.

8.Its function is similar to CEN03 type. The difference is CEN03 type is without timer and CEN04 type is controlled by a timer. CEN01 and CEN02 types are resistance type lubricators.